Thingiverse
3018 Replacement Front Endcap
par UncleMatthew
1
Téléchargements
1
Likes
0
Makes
Broke the front Bakelite piece on my 3018 :(
I designed this using a 29mm piece of 2040 extruded aluminum aka the old y axis i had laying around after i had upgraded the y axis to be bigger :)
this also allows the addition of limit switches for the y axis easier aswell as making a good place to mount a offline controller on the front
will require:
A 10mm Drill bit and drill
Assorted M4 Screws
M4 T-Nuts
The Bearing out of the old front end cap
I designed this using a 29mm piece of 2040 extruded aluminum aka the old y axis i had laying around after i had upgraded the y axis to be bigger :)
this also allows the addition of limit switches for the y axis easier aswell as making a good place to mount a offline controller on the front
will require:
A 10mm Drill bit and drill
Assorted M4 Screws
M4 T-Nuts
The Bearing out of the old front end cap
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !