Thingiverse
Cr-10 Y Carriage
by NSD3D
48
Downloads
30
Likes
0
Makes
This is a Cr-10 Y carriage that I made to reduce weight. It was inspired from the one made by tiny machines.
First, this needs to be machined out of 0.125" aluminum (Or equivalent in metric. 3mm will work). I used 6061, but I don't think it will matter. No, this cannot be printed, unless you have found a filament as stiff as aluminum. (If so, let me know what it is ;))
All of the hole sizes can be measured in whatever CAM software you are using. (I used Mastercam) If you want to modify
First, this needs to be machined out of 0.125" aluminum (Or equivalent in metric. 3mm will work). I used 6061, but I don't think it will matter. No, this cannot be printed, unless you have found a filament as stiff as aluminum. (If so, let me know what it is ;))
All of the hole sizes can be measured in whatever CAM software you are using. (I used Mastercam) If you want to modify
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in