Full Graphic Smart Controller Case

Full Graphic Smart Controller Case with brackets for 20mm extrusion.
Fits RepRap discount/clones.

Parts needed:
2.5mm drill bit
3mm drill bit
3mm tap
8) M3x8 button head screws
4) M3x20 button head screws

Drill the 8 holes in the bottom cover with 2.5mm bit and tap with 3mm tap.
Drill the 4 holes in the top cover with 3mm bit.

Instructions:
Place spacers between circuit boards use 4) M3x8 button head screws and fasten to bottom cover.
Place button in top cover (some filing may