Thingiverse
Wanhao Duplicator 9 D9 Raspberry Pi Camera Bed Mount
by Bleugh
16
Downloads
7
Likes
0
Makes
Printed - The Hollow one is a little too thin, I'll re-do the STL thicker - 8mm instead of the current 4mm. Matches well the measurements on the bed of the D9. This clamps under the bed with 4 x M4 Bolts (4mm holes) and
The Arms and Bracket use M3 x 12's for a real snug fit, M3 x 16 gives plenty of thread left over
I made this originally for the camera enclosure from
https://www.thingiverse.com/thing:2864095
I've included TWO mounting arms - one is 4mm wide both sides, the other has
The Arms and Bracket use M3 x 12's for a real snug fit, M3 x 16 gives plenty of thread left over
I made this originally for the camera enclosure from
https://www.thingiverse.com/thing:2864095
I've included TWO mounting arms - one is 4mm wide both sides, the other has
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in