Thingiverse
Moskeeto 95mm - A Micro Racing Drone
by bwees
31
Downloads
24
Likes
0
Makes
The Moskeeter 95mm
======
The Moskeeto 95mm is a drone that I designed in 2 days at my local FabLab. I had taken apart a Hubsan H107 and did not want to put it back in its plastic frame. I took some 1/8" plywood from the free scrap bin and designed a racing drone look alike in about 2 hours. I laser cut the frame, went through about 5 revision, then settled on a final design. I then hot glued a small FPV AIO camera. Now I present to you, the Moskeeto 95mm.
The Parts Labeled "3DP" are 3D pri
======
The Moskeeto 95mm is a drone that I designed in 2 days at my local FabLab. I had taken apart a Hubsan H107 and did not want to put it back in its plastic frame. I took some 1/8" plywood from the free scrap bin and designed a racing drone look alike in about 2 hours. I laser cut the frame, went through about 5 revision, then settled on a final design. I then hot glued a small FPV AIO camera. Now I present to you, the Moskeeto 95mm.
The Parts Labeled "3DP" are 3D pri
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in