Slicer Discord
Letter Boxes – 3D-Druckmodell von MyMiniFactory MyMiniFactory

Letter Boxes

von Muzz64
0 Downloads
675 Likes
0 Makes
Zum Modell
'Letter Boxes' are a unique, fun and decorative storage solution for small things. Use to store away all sorts of things including jewellery, parts, nuts / bolts / screws, cables, earphones, memory cards and much more... The range includes every letter of the alphabet with a base and a cap / lid for each. At standard scale Letter Boxes have an internal height of approx. 25mm. The lids have an internally overlapping wall 5mm deep (i.e. protrudes 5mm into the base) to form the joint. With an accurate / precise slicing app and machine the printed parts should fit together snugly but not be overly tight. At standard scale Letter Boxes are just under 100mm tall (letter height top to bottom). The width depends on the letter concerned. Scaling up uniformly should not be any problem, although it will make the cap / lid a looser fit the bigger you go, but scaling down is not recommended as it will reduce the clearance between the cap and base so they may be hard to push together or may not fi
Quelle
MyMiniFactory
Veröffentlicht
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Mindest-Druckbett
50 mm (Klein)
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Muzz64 veröffentlicht auch auf

65 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen