CR10 Laser Engraver Mount

A laser engraver mount for any CR10. Doesn't require any modification to an existing gantry and can be adjusted on the XY plane by a few MM. Fits securely and can be removed easily with one screw to the Y-plane rolling chasis. Takes about two hours to print at 20% infill. When mounted the laser point is about 35mm offset from the hotend. Designed specifically for the laser linked below.

Parts used:

2X M3 screws (3MM Dia thread) @ 10MM length

1 M3 screw @ 5mm length

405Nm 50mW Engravi