CR-10S Z-Axis Sensor Mount for 3mm Glass

I replaced my CR10S glass with a mirror tile which was only 3mm thick and found I couldn't raise the bed high enough with the adjustment wheels.
This z-axis sensor mount replaces the stock mount but the holes for the micro switch mounting are 1mm lower resulting in the print head dropping 1mm.

Gcode is from my print on the CR10S with PLA+ 210deg.
I've included the Fusion 360 file, idea file and STL. If you use the STL be sure to lay flat, I didn't print it on the edge :).

There are M3 th