Bike Repair Stand

I really liked the idea of the bike stand by bandit-ed. I had some aluminium-tubes laying around with a diameter of 25.3 mm. Since no source files were available I designed my own version of the stand in Fusion 360.

You will need 3 M5 screws and nuts to press-fit the parts.

Tubes with a slightly smaller or bigger diameter should also fit. I used the following lengths:

2 x 780 mm
2 x 367 mm

You can find the fusion 360 file here if you want to modify the model: https://a360.co/2MmnsYE