Thingiverse
Specialized Drill Cases
by kendel3d
21
Downloads
17
Likes
0
Makes
These are 3 variants of the same idea, specialized drill case holders. Two have standard 1/4" holes, one has varying hole sizes.
I usually use a 0.6mm nozzle for this kind of print with very little infill. The holes may be undersized just a tiny bit, but you can ream them out with a 1/4" drill bit by hand for a perfect fit.
The deburring bit set can be bought here.
The countersink bit set can be bought here.
The rotary rasp bit set can be bought here.
I usually use a 0.6mm nozzle for this kind of print with very little infill. The holes may be undersized just a tiny bit, but you can ream them out with a 1/4" drill bit by hand for a perfect fit.
The deburring bit set can be bought here.
The countersink bit set can be bought here.
The rotary rasp bit set can be bought here.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in