MPSM v2 Radial Fan Shroud with Axial Cooling Fan

I wanted to create something with two chambers: one chamber to cool the hot end with an axial fan, a second chamber to cool the part with a fan shroud using a radial fan. Here it is!

Use your stock fan to cool the hot end. Attach a 50mm x 15mm radial fan. Splice the radial fan in parallel to the cooling fan. Use stock spring clips to attach.

I've attached pictures of an overhang test that shows successful print of 75 degrees without support.

UPDATE: 30mm or 40mm axial fan mounts availab