Thingiverse
BLV Mod - MGN Carriage - 18MM LJC18A3-H0Z/BX Capacitive Sensor Mount
by Mr_Dabrudda
56
Downloads
37
Likes
0
Makes
MGN Carriage Mount & MK3 Locker
I had a couple problems with the BLV Mod upgrade on my AM8. The M3 screws which hold the E3D Hotend would not tightened because the nut pockets would strip out and the nut would spin. Also the M3 screws threads are not strong enough and stripped out. I ended up using zip-ties to hold the MK3 Locker and E3D together until I could redesign and reprint parts. I increased the screw size to M4 and moved the nut pocket back so all sides of the M4 nuts are held in p
I had a couple problems with the BLV Mod upgrade on my AM8. The M3 screws which hold the E3D Hotend would not tightened because the nut pockets would strip out and the nut would spin. Also the M3 screws threads are not strong enough and stripped out. I ended up using zip-ties to hold the MK3 Locker and E3D together until I could redesign and reprint parts. I increased the screw size to M4 and moved the nut pocket back so all sides of the M4 nuts are held in p
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in