MyMiniFactory
Home & Decor
Vai al Modello
Sliding Door bolt Updated! Now print fully assembled
0
Download
1.3k
Likes
0
Makes
I've added a fully assembled door bolt to print.either complete or just the bolt itself. I've included a reduced contact sliding bar version to help with prints that seem to be fused together, please let me know if this helps. I've also added a 90 degree mounted receiver created by a Myminifactory user Joshua Grimshaw, this may help when mounting the bolt in some situations. Supports not required I've added two versions with improved support for the ball handle, the previous ones the ball appears to be distorted but not unusable. If anyone prints these two with improved ball support, can you let me know if this fixes the problem, my printer is out of action for the next week or so. Print at least 3 perimeters and at least 27% infill or higher. I would recommend using a raft not a brim. Don't scale the assembled one down as the tolerances would be too close. If your printer is like mine, the parts seem slightly stuck together when printed, then you should still be able to
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
