Ambient Multicolor Light

I had a remote-controlled LED light bulb with no use, this is the result.
What you need:
- A remote-controlled LED light bulb E27-size.
- A E27-sized lamp socket which is fixed with a union nut through a hole (sorry for the awkward description)
- A 2 or 3-phased power cable for 240 Volt AC
- Three screws or rivets, I choosed 4 mm plastic rivets, to put the two parts together

The lamp foot is printed with 10% infill. The flange on the bottom is tricky to print. Next time I will use suppor