Thingiverse
MTG Life Counter
by cob50nm
365
Downloads
250
Likes
5
Makes
V1.01
Now includes a lower resolution Azorius face that is printable with a 0.4mm nozzle.
All faces will print and have been tested. The Boros still needs some tweaking to be as good as the others and you will need to play around with the print orientation to keep most of the detail.
I have included, all 10 guilds, a complelely blank side, and a blank side with a circle, if you want to add some other symbols to it.
You will need to print
* 2 Number Rings
* 1 Shaft
* 2 Side
Now includes a lower resolution Azorius face that is printable with a 0.4mm nozzle.
All faces will print and have been tested. The Boros still needs some tweaking to be as good as the others and you will need to play around with the print orientation to keep most of the detail.
I have included, all 10 guilds, a complelely blank side, and a blank side with a circle, if you want to add some other symbols to it.
You will need to print
* 2 Number Rings
* 1 Shaft
* 2 Side
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in