Thingiverse
Salt and Pepper Shaker
by sonesh
26
Downloads
35
Likes
0
Makes
Designed a salt and pepper shaker for the dining table.
Shakers (2-3 hours each):
Prints 35mm x 65mm, so you may wish to scale up to your preference.
0.1mm resolution in PLA came out beautifully.
Printing at this resolution does take time, but the mirror shine seen in the pictures is straight off the printer. No sanding/buffing/polishing needed.
Post Print, you'll need to make a hole in the top. I heated a tiny allen key, and popped in through the top. Just needs a little tidying with a k
Shakers (2-3 hours each):
Prints 35mm x 65mm, so you may wish to scale up to your preference.
0.1mm resolution in PLA came out beautifully.
Printing at this resolution does take time, but the mirror shine seen in the pictures is straight off the printer. No sanding/buffing/polishing needed.
Post Print, you'll need to make a hole in the top. I heated a tiny allen key, and popped in through the top. Just needs a little tidying with a k
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in