Thingiverse
Protective case for battery (4s 1800mah) for quadcopters.
by fresser
1
Downloads
1
Likes
0
Makes
I designed this batterybox that holds the following battery:
https://www.banggood.com/ZOP-Power-14_8V-1800mAh-65C-4S-Lipo-Battery-XT60-Plug-p-1089557.html
It is made for a batterystrap to hold it securely down without slipping.
It is a 2 part model, you'll have to print a top and a body. There is 2 different bodies, one made to fit over screws on the lisam210 frame, and one without these holes.
For securing the top, you'll need 2 small zip ties.
https://www.banggood.com/ZOP-Power-14_8V-1800mAh-65C-4S-Lipo-Battery-XT60-Plug-p-1089557.html
It is made for a batterystrap to hold it securely down without slipping.
It is a 2 part model, you'll have to print a top and a body. There is 2 different bodies, one made to fit over screws on the lisam210 frame, and one without these holes.
For securing the top, you'll need 2 small zip ties.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in