Thingiverse
Anet A8 Extruder Fan Modification (door)
by Lozury_Tech
105
Downloads
84
Likes
0
Makes
Anet A8 Extruder Fan Modification.
Now you can open the extruder by rotate the fan to the right side.
You have to put the mod on the fan of the nozzle. Maybe you need screws wich are 5mm longer. I have luck and take my original screws.
The extruderfan and aluminium block have to be screwed with two 3x30mm screws and two 3mm nuts.
Both Mod parts are screwd together with one 3x50mm screws and two 3mm nuts.
ATTENTION: It's important to sink in the holes of the aluminium block and the e
Now you can open the extruder by rotate the fan to the right side.
You have to put the mod on the fan of the nozzle. Maybe you need screws wich are 5mm longer. I have luck and take my original screws.
The extruderfan and aluminium block have to be screwed with two 3x30mm screws and two 3mm nuts.
Both Mod parts are screwd together with one 3x50mm screws and two 3mm nuts.
ATTENTION: It's important to sink in the holes of the aluminium block and the e
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in