2.4 GHz Biquad Yagi Wifi Antenna

No real changes over ReallyBigTeeth's upload. I made the closed end tube with thicker walls because CURA won't render code for structures that are too close to your printers extrusion width, so I made the tube 2mm thick. My big contribution is a snap-on clamp to hold the antenna. You will need to add a nut-bolt-washer combination. Go nuts with this.

As a test, I was able to get 100m with -67 dbi on my wifi range with this antenna in a very noisy environment. The plan is to connect a satellit