Thingiverse
Wallmounted spoolholder
by Jakwit
21
Downloads
16
Likes
0
Makes
The pipe I used in the s-hook is just some leftover "pipe" with the diameter of 25.40 mm with a wall thickness of 0,85 mm.
The rod I used across is some old speaker stands that I was able to screw together to make a long rod. This has a diameter of 19,30 mm. You could probably use several types of rods, as long as it has a diameter less than 20 mm for the top rod and less than 25 mm for the s-hooks.
Instead of threading all spools on to the rod, I hang it underneath. This way its easyer to c
The rod I used across is some old speaker stands that I was able to screw together to make a long rod. This has a diameter of 19,30 mm. You could probably use several types of rods, as long as it has a diameter less than 20 mm for the top rod and less than 25 mm for the s-hooks.
Instead of threading all spools on to the rod, I hang it underneath. This way its easyer to c
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in