Printrbot simple metal adapter for an einsy rambo board.

after printing you will need 4x m3 nuts that you will install on the bottom of the plate. you will need 4 m3 x 10mm bolts for attaching the plate to the to the bottom of the printrbot, i designed them to be counter sunk to prevent shorting with the new board. and last 4 m3 x 15mm bolts to attatch the einsy rambo board to the plate. when done all the wires will sit flush with the bottom of the printrbot and the usb cable will be ran out the bottom through the wire routing slot, this will prev