Thingiverse
PanelDue 7i Case with mount arm - Elegant look (Integrated version)
by bondy007
79
Downloads
42
Likes
0
Makes
This is Elegant and Beautiful design with practical ventilation for cooling.
Made for 7" Paneldue.
Its can be fitted to 3030 and 2020 frames.
What you'll need in addition to the printed parts:
M3X30mm screws, qty 4 (used to screw the front and the back half of the case together)
M3X6mm screws, qty 4 (used to screw the mount onto the back of the case. Could be longer [M3X10 should be fine] without running into the back of the PanelDue 7i PCB)
M3 nuts, qty 8.
M5x30mm, qty 2 (used
Made for 7" Paneldue.
Its can be fitted to 3030 and 2020 frames.
What you'll need in addition to the printed parts:
M3X30mm screws, qty 4 (used to screw the front and the back half of the case together)
M3X6mm screws, qty 4 (used to screw the mount onto the back of the case. Could be longer [M3X10 should be fine] without running into the back of the PanelDue 7i PCB)
M3 nuts, qty 8.
M5x30mm, qty 2 (used
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in