Thingiverse
Overhead LED Strip Lamp for 2020 Extrusion
by QuadeHale
112
Downloads
51
Likes
0
Makes
An overhead lamp for my Ender 3 - but it will work on any 3D printer (hell, any *thing*) that has a 2020 extrusion profile.
It holds 3x 50mm strips on each 'blade' and I slapped one more on the curved part because I could. Standard 10mm LED strip has cut lines every 50mm, so it's a hair over 150mm in length and 12mm wide so none of the adhesive sticks out.
The holes at the top can take 2x M5 bolts and T-nuts.
Current draw should be in the realm of 400mA at 12V, which I happen to be usi
It holds 3x 50mm strips on each 'blade' and I slapped one more on the curved part because I could. Standard 10mm LED strip has cut lines every 50mm, so it's a hair over 150mm in length and 12mm wide so none of the adhesive sticks out.
The holes at the top can take 2x M5 bolts and T-nuts.
Current draw should be in the realm of 400mA at 12V, which I happen to be usi
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in