Thingiverse
Belt Tensioner with nut for Anycubic i3 Mega and other printers
by gibbon_
53
Downloads
15
Likes
0
Makes
Motivation
===
I saw some of the solutions like this on thingiverse, but made my own anyway. Most of the designs I saw screw directly into the print. I have more confidence in a nut so I added a nut hole to my design.
Also the pushdown part is guided. Though it still can tilt, the screw should keep it in place.
Also the belt is kept from slipping from the part sideways by small bits of plastic sticking out.
Additional Parts needed
===
You will need one M3 screw (cylindric heads wil
===
I saw some of the solutions like this on thingiverse, but made my own anyway. Most of the designs I saw screw directly into the print. I have more confidence in a nut so I added a nut hole to my design.
Also the pushdown part is guided. Though it still can tilt, the screw should keep it in place.
Also the belt is kept from slipping from the part sideways by small bits of plastic sticking out.
Additional Parts needed
===
You will need one M3 screw (cylindric heads wil
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in