Rc cars shelf

Mine was done this way:

1. Cut OSB-3 board in proportion: 70 to 30 cm
2. Use any generic shelf support to mount a to szelf (30 cm piece) on top
2. Put m10x30 nut into "wieszak" cutout and than plug hole with printed plug (part of "wieszak". You can use glue to secure parts if you need. (i did).
3. Cut Aluminium bar to size: 60 cm
4. Put plastic parts in bellow order on the rod:
1. wspornik (on the side)
2. wieszak (this one is movable)
3. wspornik (put it on the middle - it's op