Prusa I3 Rework 40mm Laser Mount

I couldn't find an X-Carriage mount for the laser I bought. It is a 450nm 5.5 Watt, and is 40mm square with a blue heatsink.

I designed this part in Fusion360 to fit my Prusa I3 rework X-Carriage that has 23mm square hole spacing.

Rotate the STL such that the M3 bolt countersinks are facing the bed. I will fix this in a future upload. I didn't use supports, but you may try them for the M3 countersunk holes if needed.

I used Cura and set my horizontal expansion to -0.2mm.

Use M4 nuts