Remix model test "kickstarter-autodesk-3d-master" that eliminates unnecessary difficulties by conucting the test .

This test is interesting in quantifying the printer's capabilities. The test was carried out twice.
Test number 1 was performed with the following settings:

1. Material - ABS is unpainted from #3DPlast.
2. The diameter of the nozzle is 0.3 mm.
3. The height of the layer is 100 μm.
4. The printing temperature is 240 degrees C.
5. The default speed is 40 mm/s.
6. The speed of the outer perimeters is 20 mm/s.

Based on the results, a score of 27 out of 30 was obtained.
In the course of