Thingiverse
3030 - 30mm corner connector for extruded aluminium section
by Keleo
45
Downloads
33
Likes
0
Makes
This is a 3-way corner connection for 3030 profiles.
I built myself a printer housing from aluminium profile bars. Since I could not cut any threads into the profiles, I helped myself with a trick. I inserted dowels and used normal 4x40mm screws. Since the corner connections offered here use metal thread screws, I developed my own model. I put this at your disposal here.
I use AmazonBasics PETG filament with 0.2 layer height and 40% filling. So the cubes are very stable.
I built myself a printer housing from aluminium profile bars. Since I could not cut any threads into the profiles, I helped myself with a trick. I inserted dowels and used normal 4x40mm screws. Since the corner connections offered here use metal thread screws, I developed my own model. I put this at your disposal here.
I use AmazonBasics PETG filament with 0.2 layer height and 40% filling. So the cubes are very stable.
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in