Depth meter fan mount (40x40mm) designed for my CR-10.

Hi guys,

this is a simple and less than 5$ bed leveling tool. After completion I have tested it for 2 months and everything goes as planned. I use 3 clips for the bed, so at the origin point, everything is out of the way.

The depth meter I have bought from Aliexpress: https://goo.gl/tWTAa6

PLA from: http://rast3d.com

For the construction I used M3 screws:
4 short ones - 6mm (only 2 in the picture);
4 long ones, but measure them to be enough to fix your fan + 3mm for the stand;
E