Suunto Vyper Dive Computer Bungee Boot

This is a computer boot (mount) to attach the Suunto vyper to a diver's wrist via a bungee cord (shock cord).

Once printed, break off the 3 supports.

For the shock cord I used about 22.5 inches (57 cm) of 1/8th inch (3.175 mm) cord obtained at REI ($0.39/foot IIRC). The holes in the model are 5mm in diameter.

Tie a knot at one end and then feed the cord down through one of the front holes, go back to form one of the arm loops and then up through the non-diagonal back hole. Go directly