Tandon TM-100-x 5.25" Floppy Door Hinge

These parts are currently being testing to make sure they work properly.
I drilled the holes with a .094" bit for the 3/32" Brass K&S Rod.

Ver 1 Elongated the holes by .4mm to allow the Floppy Door to be Flush with the
Drive Faceplate. (Look up from the Bottom of the Face Plate to verify Door is Flush.)

Ver 3 Updated hole material to be less and punch out easier. Will still need to be
drilled to accept brass rod for the hinge. (No Ver 2 existed)