Thingiverse
Silicon sock Mold for Ender-3 and Ender-4 heat block.
by MiddleDane
74
Downloads
48
Likes
1
Makes
A mold for silicone heat block socks.
Compatible for Ender-3, Ender-4 and possibly many more.
Print and assembly:
Only Mold_Core.stl needs support. The rest can be printed without, as positioned in the stl files.
Ensure the four small holes are open in the piston. If not, drill them open with a 1.5mm drilbit.
Glue the mold cavity to the piston.
The piston have a quite snug fit into the piston guide, so you may have to do some sanding, to fit theese together. (keep it snug)
Procedure:
Compatible for Ender-3, Ender-4 and possibly many more.
Print and assembly:
Only Mold_Core.stl needs support. The rest can be printed without, as positioned in the stl files.
Ensure the four small holes are open in the piston. If not, drill them open with a 1.5mm drilbit.
Glue the mold cavity to the piston.
The piston have a quite snug fit into the piston guide, so you may have to do some sanding, to fit theese together. (keep it snug)
Procedure:
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in