Thingiverse
Betafpv Z02 Adjustable Camera Mount
by Thump2010
238
Downloads
193
Likes
3
Makes
Is your Beta65x or Beta75x going a little too fast indoors or not fast enough outside then this will let you adjust the camera angle to slow you down or speed you up.
It fits the stock Z02 camera and VTX.
The stock canopy fits but you will have to modify it elongating the lens hole to allow for the angle change or print the canopy designed for this.
https://www.thingiverse.com/thing:3137474
You will need 2 M2 screws at least 4mm but you can get away with longer and possibly down to 3mm, I
It fits the stock Z02 camera and VTX.
The stock canopy fits but you will have to modify it elongating the lens hole to allow for the angle change or print the canopy designed for this.
https://www.thingiverse.com/thing:3137474
You will need 2 M2 screws at least 4mm but you can get away with longer and possibly down to 3mm, I
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in