Thingiverse
Cr-10 Fan Case Cooler Mod v.2
by lc99
10
Downloads
10
Likes
0
Makes
This is a mount for a 80 mm fan.
you can connect the fan directly to the board with the internal fans or with a phone adapter (there is a hole for a standard switch on the right side). if you connect the fan to the board you can mirror the left cover pannel and use it for the right half.
Instructions: this is a easy mod so you have only to remove the bottom pannel of the control box and just place it on the print... easy!
you can use some glue or some tape to seal all the parts.
you ca
you can connect the fan directly to the board with the internal fans or with a phone adapter (there is a hole for a standard switch on the right side). if you connect the fan to the board you can mirror the left cover pannel and use it for the right half.
Instructions: this is a easy mod so you have only to remove the bottom pannel of the control box and just place it on the print... easy!
you can use some glue or some tape to seal all the parts.
you ca
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in