Raspberry Pi 3 and Pi 2 B+ case with Dual VESA for Wall Mount or Arm Mount

Dual VESA for the Raspberry Pi 3 (B/B+) and Pi 2 B+ for Arm Mount.

Parts List:
4 - M3 Nuts
4 - M3 x 25mm Screw
4 - M4 Nuts for Arm side
8 - M4 Screws

Directions:
1. Insert the four M3 Hex Nuts into the bottom piece.
2. Mount the Raspberry Pi to the bottom.
3. Attach the bottom piece to the monitor without the top piece (very important). Most monitor uses M4 Screws.
4. Insert the four M4 Hex nuts to the bottom and then the four M3 x 25mm screws to attach the top piece together.
5