Xinkebot ORCA 2 Cygnus X-Tensioner

X-Axis was too slack and belt springs wouldn't cut enough of the tension so I made this tensioner. It fits fairly snug on the extrusion, I have .2mm clearance on each side.

BOM:
Existing bearings
2- M5x30mm hex head bolts - Could get away with 25mm and one less nut
3- M5 nuts
1 X-Tensioner.stl

Optional:
X-Tensioner Handle.stl
1- M5 nut - secures the handle to the bolt

Printed without any support - the first layer after the nut slot had a little bit of stringing on the hole, but t