Mosquito Hot end mount CR-10S

Simple mount for a Slice Engineering Hot end with a 5015 part cooling fan and an EZABLE mount.

11/23/18; Updated the cooling to concentrate on the part instead of being to close to the hotend. New part is; Mosquito mount CR10SFIXED COOLING AGAIN v1.stl

Please if you print this be aware the 5015 fan puts out a bunch more air than the stock fan, I have been running the fan at 25~35% (set in slicing software) for PLA and about 15% for Colorfab Ngen and most PETG's