Boosted Board Handle

1. print part A - in ABS Orange
2. print part B - in ABS Black
3. Add spring between A and B and attach them together with the M4 screw and bolt
4. Unscrew the two lower bolts holding down the battery
5. Screw the handle down with the new 2 M6 bolts
6. round of applause !

Material to buy:
-1x ABS+ Orange filament
-1x ABS+ Black filament
-1x M4 25mm bolt and nut
-2x M6 25mm bolt
-Spring 30mm

You will need:
-Allen Keys
-Screw driver


This handle has been tried on a Boos