Thingiverse
BubbleCat Machine (Gatto sforna bolle)
by MiguelBi
31
Downloads
22
Likes
0
Makes
| My revised version of the soap bubbles machine |
Required parts:
- 3D printed parts
- MG90S, SG90 or HK15178 servo modified for continuous rotation
SG90
- Computer fan Frame size 92 X 92 X 25 mm (3.6 x 3.6 x 1 in) >50CFM
- Power plug
- 12v Power supply (Plug or battery)
- Small 5v regulator to supply the 5v to the servo (must adjust regulator prior to wiring to servo)
- Switch
- Misc hardware
CAUTION!!
The print has been divided into several parts. The liquid tank is not
Required parts:
- 3D printed parts
- MG90S, SG90 or HK15178 servo modified for continuous rotation
SG90
- Computer fan Frame size 92 X 92 X 25 mm (3.6 x 3.6 x 1 in) >50CFM
- Power plug
- 12v Power supply (Plug or battery)
- Small 5v regulator to supply the 5v to the servo (must adjust regulator prior to wiring to servo)
- Switch
- Misc hardware
CAUTION!!
The print has been divided into several parts. The liquid tank is not
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in