Simple 3D Printer Case

Before you rebuild something like this, first print out a part and then go to the building center.
See if you already have the necessary carrier strips of the dimensions, or check it with the printed part.

This is needed:

- 2x wooden panels (60x60x20cm) (top & bottom)
- 4x Plexiglass (500x500x2mm) (for the sides)
- 4x Wooden bellows (5x4,3x50cm) (The carriers)

The rest should be clear... - The Plexiglass is then pushed in sideways.

[German]
Bevor Ihr so etwas nachbaut, druckt euc