Jaso J5010 Tower Crane miniature

This is a (huge) miniature for the JASO J5010 Tower Crane.

Note that you will need a big printing bed for this model.
I has some over 200mm parts. Its not a good idea to scale down, since many walls are already 2mm thick.
After assembly, it will be almost the 2/3 wide as a 40" TV.

All the holes are made to use "raw filament" as "iron pins".
For the boom cables, use flex filament and a hellerman ties.

Just the hoist mechanism and electrical cupboard need bolts.

I printed everythin