Motormount for Turnigy 35XX Aerodrive SK3 for RC gliders

This mount is designed for the Turnigy 3536 1050kV motor and must be on top of a pylon made out of wood e.g. and the pylon is placed between the 2 wings. You must make the pylon yourself.
The parts with 5 holes is 5mm thick and measures 40x40mm.
The space between these parts about 5,5 mm. If its to wide just fill it up with plastic or wood. The 5 holes are 2 mm diameter. I use 3 mm bolts/nuts to secure the mount to the pylon.
The part with 4 holes is 10mm thick.
The front side of the moun