Thingiverse
Magnet switch for fridge note: no glue
by cashew675
10
Downloads
9
Likes
0
Makes
A "NO or ON" fridge magnet switch.
For those who want to combine magnets and 3D print, this is a perfect project.
The idea is originally from
https://www.thingiverse.com/thing:1653924
although I create my own geometry.
I also play around with NO and ON, so that either direction is the right direction. Switch up, you will have NO and note falls; switch down, you get ON and note stay.
Most importantly, I measure and calculate the angles for that two slopes, which are 6.84°.
This an
For those who want to combine magnets and 3D print, this is a perfect project.
The idea is originally from
https://www.thingiverse.com/thing:1653924
although I create my own geometry.
I also play around with NO and ON, so that either direction is the right direction. Switch up, you will have NO and note falls; switch down, you get ON and note stay.
Most importantly, I measure and calculate the angles for that two slopes, which are 6.84°.
This an
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in