Handcuffs (without additional hardware)

This is an remix of a wonderful pair of handcuffs, desingned by sthone.

For the finished handcuffs you'll need 10 'Handcuff_Pin.STL' to hold everything together.
Also 2 Pins of 1.75 Filament are needed to secure the locking-bar (red on 3nd the pic).
For the second cuff mirror,
-'Handcuff_Casing.STL'
-'Handcuff_Casing_Face.STL'
(-'Handcuff_Locking_Arm_Bow.STL', only to have the same surface, but technically not needed)
in your slicer.

The key is a normal handcuff key
(for ex