Thingiverse
Tomu programming jig
by todbot
6
Downloads
7
Likes
0
Makes
This is a 3d-printed pogo-pin programming jig for Tomu (https://tomu.im/), a tiny USB device. Normally you can use the built-in USB bootloader to reprogram it, but in the cases where you can't, having a jig to align the SWD programming pins on the bottom can help.
To build this jig you will need:
* the 3d printed parts here
* 4 pogo pins, like these [P111-E 1.3mm Diameter, 33.30mm long test pins](https://www.amazon.com/exec/obidos/ASIN/B007Q8JRZ8/ref=nosim&tag=todbotblog-20)
* two [Adafr
To build this jig you will need:
* the 3d printed parts here
* 4 pogo pins, like these [P111-E 1.3mm Diameter, 33.30mm long test pins](https://www.amazon.com/exec/obidos/ASIN/B007Q8JRZ8/ref=nosim&tag=todbotblog-20)
* two [Adafr
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in