Bike stand one tube 19mm and 4 screws

a bike stand built with just one tube of 19mm (stainless steel).

for this version you can use only 4 screw with nuts (3mm). for attach the top supports.
base no need screws, you can use some super glue but is not necessary.

finally i use some floor protector under the base. (just in case).

print with 40% fill.


Materials
========

- 1.2metres tube of 19mm (normally used for bathrooms) and get 3 parts (60cm, 30cm, 30cm)
- 4 screws with nuts of 3mm