phone holder with charger connection - Galaxy S9 shell (exchangeable)

**3 Parts - 3 print settings**

**Parts:**
- base plate
- shell (for Samsung Galaxy S9)
- connector paneling (suitable for the supplied cable)

Print Settings:

**Base:**
- layer height 0.1 , or variable layer height (0.1 only for the round plate look)
- top layers: >= 5 (again: round base plate. I used just 2 top layers. view the photos... )
- support: no

**Shell:**
- layer height: 0.2mm are ok.
- support: print it _vertical_ with a brim. this way no support is necessary