Thingiverse
DM Screen (Magnet Joins)
by Berko
89
Downloads
78
Likes
0
Makes
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/fKuiL4wmnpz
This has been printed and tested!!!
To join it, you will need 6mm X 1.5mm Magnets (can buy off ebay cheap!)
each panel has six magnets - if you do it properly, all the panels should join in any order!
be careful when you glue them, its hard to remove them without wrecking the panels!!!
The Main Panel = 180mm X 158.17mm X 8mm
The Wall Panel = 180mm X 141.9 mm X 8mm
Corner Joins
This has been printed and tested!!!
To join it, you will need 6mm X 1.5mm Magnets (can buy off ebay cheap!)
each panel has six magnets - if you do it properly, all the panels should join in any order!
be careful when you glue them, its hard to remove them without wrecking the panels!!!
The Main Panel = 180mm X 158.17mm X 8mm
The Wall Panel = 180mm X 141.9 mm X 8mm
Corner Joins
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in