Thingiverse
Filament guide with support for filament sensor (Geeetech A30)
by postmaster11
72
Downloads
35
Likes
2
Makes
Printed on A30 and Wanhao i3 mini with 25% infill
- wheel runs on two MR148ZZ bearings
- sensor mounted using an M3 screw with nut
- guide mounted using the stock ball button
===Update: V2===
- my filament blocked on spool after a few hours of printing => the guide has been cracked, but better this than the filament sensor which was safe
- filament sometimes leaves the wheel, therefore I adjusted the wheel size and made sure the filament cannot drift away
- sensor cable can be fixed u
- wheel runs on two MR148ZZ bearings
- sensor mounted using an M3 screw with nut
- guide mounted using the stock ball button
===Update: V2===
- my filament blocked on spool after a few hours of printing => the guide has been cracked, but better this than the filament sensor which was safe
- filament sometimes leaves the wheel, therefore I adjusted the wheel size and made sure the filament cannot drift away
- sensor cable can be fixed u
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in