Thingiverse
Alfawise U20 C270 Webcam Arm
by Rural-Geek
15
Downloads
11
Likes
0
Makes
This is a simple articulated arm to mount a C270 (Logitech) webcam on an Alfawise U20 printer, __without disassembling anything from the webcam__.
__For printing, keep all pieces in there native orientation and enable "Support" only for "Pied_Pied_C270_2020_Alfawise.stl". Infill 20% for all parts.__
You will need a pair bolt/nut M3x200 for each printed "Maillon_Pied_C270_2020_Alfawise.stl".
The foot (Pied_Pied_C270_2020_Alfawise.stl) uses 2 or 1 bolt/nut M4x150.
You will also need
__For printing, keep all pieces in there native orientation and enable "Support" only for "Pied_Pied_C270_2020_Alfawise.stl". Infill 20% for all parts.__
You will need a pair bolt/nut M3x200 for each printed "Maillon_Pied_C270_2020_Alfawise.stl".
The foot (Pied_Pied_C270_2020_Alfawise.stl) uses 2 or 1 bolt/nut M4x150.
You will also need
Makes
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign in